DEMILARE 4FT LED Wraparound Light - AZ, 6600lumens, 5000K, Selectable Wattage, AC 120V

I went with this DEMILARE 4?foot wraparound light because it’s the kind of all?purpose shop fixture that works in garages, utility rooms, and workspaces without overthinking the install. The selectable wattage-40W, 50W, or 60W-lets you dial in brightness, and at full power it pushes around 6600 lumens at 5000K, which is that clean daylight tone most people prefer for task lighting.In real use, the linkable design is the standout. You can hardwire it and chain multiple fixtures together for long runs without dealing with separate circuits. The housing feels lightweight but solid enough for shop duty, and the 110LM/W efficiency keeps power use reasonable.Only limitation: being hardwired, it‘s not a plug?and?play swap.Bottom line: a bright, flexible, selectable shop light that’s great for upgrading a workspace or garage.

This 4' wraparound fixture is great for laundry, utility, storage rooms, and workshops. The main housing is steel sheet metal and formed nicely. The end caps and opaque diffuser are plastic, and the whole fixture is pretty lightweight. It has provisions for mounting to typical lighting j -boxes, and keyhole slots towards the ends for adding supplimental support. It installs easily. This fixture can be connected with others to be controlled from a common feed with an included end to end hard plug or 55" jumper cord for multi fixture applications. If this is the only fixture on a feed you'll make your connections on the interior of the fixture after removing the diffuser. Also on the inside is an adjustable power output selector switch. You can choose from 3 levels of brightness to set and suit your needs. Output color temp is 5000K which is a neutral white with good color rendering. When lit the fixture proves ample lighting from the single row of LEDs within. The lens does a good job of keeping the light soft without any glare. The linear design helps reduce shadows when working below it. This fixture is midrange in durability and best suited for interior applications where adequate general lighting is needed and the risks from environmental hazards and mechanical damage is low.

Garage or shop light, ideal for new construction or replacement of the 4‘ fluorescent fixtures. ETL listed for safety and to meet US safety standards. Special note, this is designed as a hardwired ceiling mount fixture, not the hanging workbench style lighting that has a plug in cord. It includes a direct end to end adapter and a 59’ long adapter that will allow you to install up to 8 additional lights. (This 59‘ cord is only for direct end to end connection between lights, not a wall outlet power cord, although if you are handy with electrical, you could cut one end and put a male plug adapter there instead.)This has an adjustable brightness setting of 40-50-60 watts with 4400-5500-6600 lumens respectively. Unlike many LED with adjustable CRI this has only a fairly cool daylight CRI of 5000K. This is great for most working conditions, the warm colors are more frequently used in living rooms and bedrooms, not the general application for this lighting fixture.Overall, a bright light, make sure it fits for your intended use application.Recommended

This 4 foot LED wraparound light is designed to provide bright, energyefficient illumination for workshops, garages, offices, or commercial spaces.It features selectable wattages of 40, 50, or 60 watts, delivering up to 6600lumens of 5000K daylight brightness. This linear design ensures even lightdistribution, making it ideal for work areas where clear visibility is essential.This light is linkable, allowing multiple fixtures to be connected for extendedcoverage. With high efficacy at 110 lumens per watt and ETL listing forsafety, this LED fixture offers both efficiency and reliability. Its durableconstruction and easy installation make it a practical solution for bothresidential and commercial lighting needs.Selectable 40W, 50W, or 60W for customizable brightness.6600 lumens with 5000K daylight color for clear visibility.Linkable design for extended coverage in larger areas.Overall quality is very good, bright, and reliable. This fixture feels sturdy,produces consistent daylight illumination, and is easy to install, making it anefficient choice for workspaces and commercial areas.

This is a great LED light fixture that easily brightens up a 10‘ x 10’ space. The diffuser really softens the light, making it easier on the eyes without any LED shadows. The weight is great, some of these lights are just too cheaply made and they flex like crazy, but this one is quite rigid, especially with the diffuser snapped in place. The look is kind of a modern look. Functionally, it works fine, but it doesn‘t come with a wall outlet cord, so it will need to be hardwired. Personally, since it does come with a light to light cord, for ganging these fixtures, which plugs into a port on each end of the light, I used this cable to create my own cord, which plugs into a standard 110Vac outlet.I’m giving this 4 stars only because they didn‘t have the foresight to include a cord to go from the end plug to a wall outlet. In the instructions they seem to expect at least one light to be hardwired, then other lights are ganged from that using the included cords, so there are 1/2“ knockouts on the underside of the fixture (center and ends) for installation, but otherwise each end plug and the led driver are all wired in parallel.

So let's start with the BAD....the installation....fast installation??? For who?...a master electrician?? This thing needs hard wiring. If you were hoping (which I was) that this was just some simple plug in light, you would be wrong. I had to have a contractor wire and mount this for me. -- Also it doesn't have a button on the outside to change the brightness or if it does I can't find it. It looks like you have to take the lens off and adjust it?? I must be dumb. I wish it just had a remote control...it would be a lot easier to adjust the brightness.The good? Well if you're looking for a light in the garage or somewhere you need a really bright light...this ones for you. I have it under a cabinet in my office. And at 5am in the morning when it's pitch black out and you flip the light switch it's like a solar flare hitting your eyes. Bright white light! If you have any sensitivity to bright lights you may want to be careful.Now that I've had it for awhile I guess I like it, but next tim my handyman is here I'll have him lower the brightness.

This is a very nice light and it is very bright. I like that it has multiple settings if you don't want it quite so bright. I have it in a work area of my basement, so I wanted it bright. It is perfect for what I needed. It is intended to be hardwired into existing electrical wires, but it wasn't too complicated to wire in a line with a plug so that I could just plug into an outlet. That made it easier and more versatile to use. I wish they had though to include the option to do that, but no worries. It is very light and easy to hang. Can easily do it with one person since it isn't cumbersome at all and no worries about those awful fluorescent tubes breaking. Looks really nice. Overall, I am quite happy with this.

Bought this to replace an old fluorescent fixture in my garage workshop and overall I'm happy with it. The brightness is really good especially on the 60W setting and the 5000K daylight color makes everything look clear without that harsh blue tint some leds have. Installation was straightforward since it can surface mount or use a junction box, and linking multiple ones looks easy if I ever need more.The build quality feels decent for the price, and I like that you can select 40/50/60W without buying different lights. It puts out a nice even light with no dark spots. Only reason it's not 5 stars is the prismatic lens is a bit more reflective than I expected. you can see a slight glare if you're working directly underneath it, and the included connecting cables are on the short side if your fixtures aren't perfectly aligned.Still for $40 it's a big upgrade over the old buzzing tubes. Would recommend if you're looking for an affordable, bright workshop or garage light.

I love fluorescent lighting. This is LED lighting that looks fluorescent - I love this even more.Do note that these are wired in, not plug-in so you will need to wire it to your house electric - bonus is you can wire additional lights easily to your first light...link them up. Really good for your garage or workspace where you need constant bright light. If you want bright. You can adjust it from 60 watt to 40 watt.The price is a little high, I think but then everything is higher right now. These are light-weight so easy to work with when wiring it in and what really makes them better than fluorescent -no bulbs that break into a thousand pieces.

This is a good quality light with some nice features.Out of the box the light feels substantial. The metal is fairly thick and the light doesn't flex much. The diffusing cover is equally substantial. The unit comes with screws for installation and is corded for direct installation. It does not have a plug, but you can add one as I did after feeding the cord through a knockout hole.The brightness is adjustable, which is nice if you have smaller areas to light. The switch is under the cover/diffuser. Three levels and each is significantly different, but I use the highest for my workshop. The color is bright white 5000k. That's great for my work area for seeing details.This is a high quality light that functions exactly as it should and have nice features. It's a good value for the money and I'm happy with it.

Great light for my work bench, plenty of light. I do wish it included a wall plug as the light I was replacing was and I had to wire this directly. It is not meant to be a hanging light and should be installed on a light box.

Really like these shop lights! They are very bright and easy to install with some basic DIY skills. They function perfectly and look great in my shop. They will be much more durable than the fluorescent lights I replaced. These will last years with no maintenance at all. Excellent value for the price!

This 4ft LED wraparound light is everything I needed to replace outdated fluorescent fixtures-and it performs even better than I expected. The adjustable brightness is a standout feature. Being able to switch between 60W, 50W, and 40W means I can fine?tune the lighting for different ceiling heights and tasks without swapping out the entire fixture. At full power, the 6600 lumens of 5000K daylight completely eliminate dark spots and give my garage and workspace the clean, bright visibility I've been wanting.Installation was fast and straightforward. It works with a standard junction box or surface mount, and the linkable design is incredibly convenient. I love that I can connect multiple units in a row using the included cords-perfect for larger garages or workshops.The light quality is excellent. With a CRI over 80 and a wide 120° beam angle, colors look true and the illumination is even and glare?free. The prismatic lens softens the light just enough while still keeping everything crisp and clear.The build quality feels solid, and the ETL listing gives me confidence in its safety and durability. The 3?year warranty is a great bonus, and it's clear the company stands behind their product.This fixture is bright, efficient, versatile, and thoughtfully designed. A fantastic upgrade for garages, utility rooms, workshops, or any space that needs reliable, high?quality lighting.

Great light set that is easy to install, comes with everything needed. Pop the diffuser off, cut a small zip tie, push a knock out through with your finger. Then run the cables through the back and either attach to a an existing box or what I did, write it to a normal 110 plug. Use the screw holes and screws that come with the unit to mount on the ceiling. Test the light with the cover off, select the switch for how much light you want (three positions). Then put the diffuser cover back on and done. Light weight, great light coverage and good width. The unit comes with cable and has a fitting so that if you buy more than one you can daisy chain them together, without needing to individually run power to every unit, just the first one. I mounted in the garage and it throws a good light without a lot of shadow, one of the the advantages of the longer lights. I may add a couple more units since it is simple to chain them together. Note that because these are hard wired, they do not have an on/off switch, that's handled by the outlet or box they are wired into, which is expected. The diffuser attaches by the pressure of the plastic spreading against the light fixture, this is fine and works well, plus seals good so shouldn't see any bugs climbing around there over time as the unit is sealed well.

I installed this 4ft LED wraparound light in my garage, and it completely changed the space. The brightness is amazing - at 6600 lumens and 5000K daylight, it lights up every corner without harsh shadows. I love that you can select between 40W, 50W, and 60W, so I can dial in just the right brightness depending on the task.The quality feels solid - the fixture is sturdy, well-built, and the hardwired design gives it a clean, professional look. I also really like that it's linkable, which makes it easy to add more lights without a complicated setup. Installation was straightforward, and once up, it's been completely reliable.For the price, brightness, and versatility, this light is a huge upgrade over old fluorescent fixtures. It makes working on projects, detailing cars, or just finding things in the garage so much easier, and it feels like a permanent, high-quality solution rather than a temporary fix. Not to heavy

This 4-ft LED wraparound light delivers exactly what it should: clean, even daylight that immediately makes a workspace more usable. At 5000K, the light is bright without feeling harsh, and the wide beam spreads illumination evenly with no distracting glare or hot spots.The selectable wattage is the standout feature. Being able to choose between 40W, 50W, or 60W lets you dial in brightness based on ceiling height and room size instead of being locked into a single output. At full power, it‘s impressively bright and well-suited for garages, workshops, basements, or utility rooms where visibility actually matters.Installation is straightforward for a hardwired fixture, supporting both junction box and surface mounting. The linkable design works well for larger spaces, allowing multiple fixtures to be daisy-chained cleanly without extra hardware. Light output remains consistent across linked units, which is exactly what you want in a continuous run.Build quality feels solid, with a clean internal layout and a prismatic lens that softens the light while maintaining good color accuracy (CRI >80). It’s efficient, runs cool, and clearly designed for long-term use rather than cutting corners.One thing to note is that this is a hardwired fixture. The included cord is for linking additional lights, not for plugging directly into an outlet. As long as you go in expecting that, this is a reliable, bright, and flexible LED shop light that focuses on performance and efficiency rather than gimmicks.